100% Satisfaction Guaranteed We Ship Worldwide


Shop by Category

  Product Home > *** MANUFACTURES *** > Signal Dynamics >

BackOFF Brake Light Module
BackOFF Brake Light Module- Signal Dynamics

BackOFF™ Brake Light Module
Price: $42.95
Sale Price: $37.95
Save $5.00!

Product Code: SDC-01001


Note: This module will not work with LED brake lights. The BackOFF XP Brake Light Module with work with both standard incandescent and LED brake lights.

Flash Pattern
When you apply your brakes, it causes your brake light to automatically emit a visual alerting signal of 3 short light flashes, followed by 1 steady on light for 2 seconds. This signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to gain and retain following driver's attention. Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFF automatically facilitates compliance and enhances safety. Install the BackOFF and see how much more effective your brake light can be.

To install, wire the BackOFF Brake Light Module in-line with your existing brake light wire. Locate your brake light wire and cut the wire into 2 (use a test light or multi-meter to find proper wire). Connect the red wire from the BackOFF Brake Light Module to the cut wire end leading toward the front of the motorcycle. Next connect the white wire with the red stripe to the cut wire leading toward the rear of the bike. Finally peel the paper lining off of the double sided adhesive pad and mount the module to a clean, flat surface.

Solder connections or use crimp connectors (not included)

Red Wire: Brake Light Wire Leading toward front of Bike
White Wire with Red Stripe: Brake Light Wire Leading toward Bulb

Part Number: 01001
Weight: Less than 1lb
Amp Limit: 10 Amp Max (up to 3 Standard Incandescent Bulbs)
System Requirement: 12VDC(-)
Attachment Method: Included Double Sided Adhesive Pad
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Package Contents: (1) BackOFF Brake Light Module, (1) Adhesive Mounting Pad
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: No
Tools Required: Wire Cutters/Splices
Waterproof: No
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a

Install the Original BackOFF Brake Light Module
BackOFF Brake Light Module
Signal Dynamics Headlight Modulator Back Off Brake Light Kuryakyn LED Battery Gauge Video

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

*** MANUFACTURES *** > Signal Dynamics
Electrical > Brake Light Modules
BRAKES > Brake Light Modules
*** MOTORCYCLES *** > Suzuki
*** MOTORCYCLES *** > Suzuki > Hayabusa 08+
*** MOTORCYCLES *** > Suzuki > Hayabusa 12+
*** MOTORCYCLES *** > Suzuki > Hayabusa 99-07
*** MOTORCYCLES *** > Suzuki > TL1000R/S 98-03
*** MOTORCYCLES *** > MV Agusta
*** MOTORCYCLES *** > Kawasaki
*** MOTORCYCLES *** > Honda > Grom
*** MOTORCYCLES *** > Honda > Goldwing
*** MOTORCYCLES *** > Honda
*** MOTORCYCLES *** > Ducati
*** MOTORCYCLES *** > Can Am
*** MOTORCYCLES *** > Buell
*** MOTORCYCLES *** > Aprilia
*** MOTORCYCLES *** > Yamaha