100% Satisfaction Guaranteed We Ship Worldwide


Shop by Category

  Product Home > *** MANUFACTURES *** > Signal Dynamics >

BackOFF Wig-Wag Brake Light Module
BackOFF Wig-Wag Brake Light Module

BackOFF™ Wig-Wag™ Brake Light Module
Price: $42.95

Product Code: SDC-01009


The BackOFF Wig-Wag Brake Light Module automatically flashes your dual brake lights to capture the attention of following drivers and to make your motorcycle more visible. This module is specifically designed for use with motorcycle's that are equipped with 2 brake lights located side by side. The Wig-Wag enables your brake lights to alternate back and forth in a wig-wagging pattern. When installed, the motorcycle's brake light becomes significantly more noticeable because your brake light will flash with your choice of 2 attention getting wig-wagging patterns. This module is designed to work with standard incandescent brake lights, LED brake lights, or a combination of both.

Note: Do not install this module on your turn signals as it can confuse drivers behind you. Also, this module is rated at 10 amps which can generally drive up to (3) standard bulbs, we recommend only connecting it to one pair of brake lights.

Flash patterns when you apply your brakes

These flash patterns are not random, but have been selected because of their ability to gain and retain following driver's attention. Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFF Wig-Wag automatically facilitates compliance and enhances safety. Install the BackOFF Wig-Wag and see how much more effective your brake light can be!



Solder connections or use crimp connectors (not included)

Black wire: Ground
Red wire/white stripe: Right brake light wire (wire leading to the rear)
White wire/red stripe: Left brake light wire (wire leading to the rear)

CHOOSE 1 MODE BELOW (CAP OFF UNUSED WIRE) Connect to brake light wire - leading toward the brake switch (front of bike)
Mode 1: Red wire

Mode 2: Orange Wire


Part Number: 01009

Weight: Less than 1lb
Current Limit: 10 Amp Max per Output (up to 3 Standard Incandescent Bulbs/output)
System Requirement: 12VDC(-)
Attachment Method: Included Double Sided Adhesive Pad
Height (in): 5/8"
Length (in): 2 1/4"
Width (in): 1 5/8"
Wire Length: 5"-6"
Material: Anodized Aluminum Case with Heat and Water Resistant Potting
Wire: 16AWG - 20AWG
Package Contents: (1) BackOFF™ WIG WAG Brake Light Module, (1) Adhesive Mounting Pad
Color / Finish: Black Anodized
Hardware Included: No
Connectors Included: No
Tools Required: Wire Cutters, crimp connectors; optional test light, soldering iron
Waterproof: No
Water Resistant: Yes
Heat and Vibration Resistant: Yes
Companion Product(s): n/a

Backoff Wig Wag Brake Light Modulator
Back Off! Wig-Wag
Signal Dynamics BackOFF Wig Wag on a Honda GL 1800
Whitney Trunk + LCK LEDs + BackOff Wig-Wag OutbackJon OutbackJon

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

*** MANUFACTURES *** > Signal Dynamics
Electrical > Brake Light Modules
BRAKES > Brake Light Modules